Memory backup battery for FX2N
CE(Battery)
Relay output
Sink/Source
50|60Hz
I/O control method: batch processing method (when END instruction is executed), I/O refresh instruction, pulse catch function
Programming language: Relay symbol method + step ladder method (SFC expression possible)
Number of input points:8
30W
Number of output points:8
Arithmetic control method: Stored program repetitive operation method (dedicated LSI), with interrupt function
Maximum memory capacity: 64000 steps including comments and file registers
100 to 240V
Memory backup battery for FX5U, FX5UC, FX3G, FX3U, FX3GC, FX3UC, IU2-3M10, IU2-1EMES-100M
Relay output
Sink/Source
50|60Hz
I/O control method: batch processing method (when END instruction is executed), I/O refresh instruction, pulse catch function
Programming language: Relay symbol method + step ladder method (SFC expression possible)
Number of input points:16
35W This is the value when the 24VDC service power supply of the basic unit is consumed at maximum by the additional input/output expansion block or special expansion unit/block.
Number of output points:16
Arithmetic control method: Stored program repetitive operation method (dedicated LSI), with interrupt function
Maximum memory capacity: 64000 steps including comments and file registers
100 to 240V
It can be converted to a connector for FX3U-ADP*** connection.
Applicable sequencer: FX3U, FX3UC-32MT-LT(-2)
No battery backup required, writable by sequencer, with protect switch to prevent accidental writes
Flash memory
Applicable sequencer: FX3U, FX3UC (Ver. 2.20 or later)
16000 Step
1024
Number of input/output devices: 8192
Basic instruction processing speed(LD X0):80ns
Peripheral device connection port: USB, RS-232
Memory card I/F:No
Program capacity: 10K steps
1024
Number of input/output devices: 8192
Basic instruction processing speed(LD X0):60ns
Peripheral device connection port: USB, RS-232
Memory card I/F:No
Program capacity: 15K steps
2048
Number of input/output devices: 8192
Basic instruction processing speed(LD X0):40ns
Peripheral device connection port: USB, RS-232
Memory card I/F: Yes
Program capacity: 20K steps
4096
Number of input/output devices: 8192
Basic instruction processing speed(LD X0):1.9ns
Peripheral device connection ports: USB, Ethernet
Memory card I/F: Yes
Program capacity: 30K steps
4096
Number of input/output devices: 8192
Basic instruction processing speed(LD X0):1.9ns
Peripheral device connection ports: USB, Ethernet
Memory card I/F: Yes
Program capacity: 60K steps
Internal Current Consumption5VDC:0.12A
M4 screw hole or φ4.5 hole (for M4 screw)
Number of I/O units installed: 8
Expansion connection available: Expansion connection available
Applicable units: MELSEC-Q series units
Applicable power supply unit: MELSEC-Q series power supply unit
100 to 240VAC(-15% to +10%)
5VDC:6A
Base mounting position: Power supply unit mounting slot
Compatible base unit: Q3 B, Q3 DB, Q6 B
Inrush current: 20A within 8ms
50|60Hz 5%
External wiring connection method: screw terminal block (M3.5 screw)
5VDC internal current consumption:0.33A
16 points (I/O allocation: Intelli 16 points)
アナログ出力点数:2点(2チャンネル)
Conversion speed:80us/1channel
Input (resolution):0 to 4000,-4000 to 4000,0 to 12000,-12000 to 12000,-16000 to 16000
DC-10 to 10VDC|DC0 to 20mA
External wiring connection method: 18-point screw terminal block (M3 screw)
Conductor resistance:0.051Ohm
Additional cable
0.6m
Internal Current Consumption(DC5V):0.58A
32 points (I/O allocation: Intelli 32 points)
Software: Data logging function/event logging function/report function/recipe function
10BASE-T/100BASE-TX:1channel
16 points (I/O allocation: 16 free points) (Can be changed to 0, 16, 32, 48, 64, 128, 256, 512, or 1024 points by parameter.)
Blank cover for Q base unit I/O slot
Output common method: 32 points, 1 common
5VDC:180mA(TYP. allON)
32 points (I/O allocation: 32 outputs)
1ms
Transistor output: 32 points, 12/24V DC, 0.2A/1 point, 2A/1 common (sink type)
External wiring connection method: 40-pin connector
ECCN: EAR99
ECCN: EAR99
CJ1WTC002