Chip One Stop - 전자 부품, 반도체 인터넷 쇼핑몰
Menu
South Korea
Change
한국어
SELECT YOUR LANGUAGE
US달러
SELECT YOUR CURRENCY FOR DISPLAY
우대 스테이지/할인율에 대하여

현재 상품 가격은 할인된 가격으로 표시되고 있습니다.


・고객님의 이용 상황에 따라 우대 스테이지와 할인율이 적용됩니다.
・할인에 관해서는 당 WEB 사이트에서의 직접 주문에 한합니다.
・일부 우대 스테이지 대상 할인 적용이 안되는 제품과 수량이 있습니다.
・우대 스테이지의 자세한 내용은 고객 담당자에게 확인하시기 바랍니다.
・기타 할인과 함께 사용할 수 없습니다.

뉴스 센터

Toshiba Launches H Bridge Driver IC for Low-Voltage (2.5V) Drive

2016/03/29Toshiba  아날로그


March 28, 2016


TOKYO– Toshiba Corporation's (TOKYO: 6502) Semiconductor & Storage Products Company today announced the launch of "TC78H620FNG", an addition to its line-up of H bridge[1] driver ICs  for the DC brushed motors and stepping motors used in the mobile battery-drive equipment (cameras and small printers) and home appliances. Mass production starts today.


The new product adopts a four-port interface control using the PHASE signal and the ENABLE signal. The existing product, "TC78H610FNG" with standard interfaces, needed four ports for full step control of the stepping motor. The new product "TC78H620FNG" secures control with three ports. With the high functionality of the set, there are cases where the lack of control ports of the MCU is an issue. This product will contribute to solving the problem.


The new product is compatible with low-voltage drive (for motor drive: 2.5V and above, for logic control: 2.7V and above), and thus suitable for mobile devices (cameras and small printers) with a 3.7V lithium-ion battery drive.


Main Features
・The PHASE and ENABLE interface signals secure full step drive of the stepping motor by three control ports.
・It can control two DC brushed motors or one stepping motor.
・A small package (SSOP16) downsizes the mounting area and reduces the cost of the board.
・Abnormality detection functions (over current detection, thermal shutdown circuit, and under voltage lockout circuit) are incorporated to improve safety in driving the motor.
・Consumption current of 0μA (typ.) in standby mode is realized.
・Shoot-through current protection is incorporated. The motor can be controlled without considering the dead time in switching output ON and OFF.


Main Specifications

 

Note 1 H bridge: A circuit formed by aligning transistors in an H form. Used to drive DC brushed motors and stepping motors with forward and reverse control.


For further information about this product, please visit
http://toshiba.semicon-storage.com/info/lookup.jsp?pid=TC78H620FNG®ion=apc&lang=en?mm=cp160329&no=03

 

*Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.


Toshiba Corporation- Semiconductor and Storage Products Company Website>
http://toshiba.semicon-storage.com/ap-en?mm=cp160329&no=04


Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site


기업 HP:
http://toshiba.semicon-storage.com/ap-en?mm=cp160329&no=04

Toshiba 의 뉴스 릴리스

관련 뉴스 릴리스