Videos
Learn how to get started with our Sense2GoL Pulse Board | Infineon
https://www.infineon.com/24GHz
00:33 Unboxing
01:07 Connecting the board & SW download
03:13 Radar GUI
04:57 Motion Tracker
Arushi Jain, Application Engineer from our Radar Sensor's Team, walks you through the steps to get started with the Infineon Sense2GoL Pulse board. This development kit allows the user to implement and test several sensing applications at the 24 GHz ISM band such as motion detection and speed measurement. The kit operates in a pulsed mode achieving 18 m detection range with a sensor power consumption less than 5 mW. The demonstration kit consists of two boards, the radar front end board: SHIELD_BGT24LTR11 and the microcontroller board: RADAR BB XMC4700. The baseboard adds additional flexibility by allowing battery operation, current measurements, SD card reader for storage and Arduino compatible pin connectors. Explore and learn more.
-------------------------------------------------------------------------------------------------------------
Our Website:
https://www.infineon.com/
All Products:
https://www.infineon.com/cms/en/product/
-------------------------------------------------------------------------------------------------------------
Jobs and Career:
https://www.infineon.com/cms/en/careers/
-------------------------------------------------------------------------------------------------------------
Any Questions? You can ask in German/Deutsch or English/Englisch in the Comment Section below or:
https://www.infineon.com/cms/en/about...
#radar #motiondetection #24GHz
