Chip One Stop - Shopping Site for Electronic Components and Semiconductors

チップワンストップ

Menu
United States
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

MC3672  
MEMSIC   IMUs (Inertial Measurement Units)  -  Product Details

MC3672

  • C1S545100000032

Images are for reference only

  • Added to bookmarks.
  • Other Documents

    • ECCN:EAR99
    • HTSN:8542390000
    • Lifecycle Status:Active
    • RoHS
    • PB free
    Number of axes
    3
    Detection range
    2g, 4g, 8g, 12g, 16g
    Sensitivity
    8 LSB/g to 4096 LSB/g
    Power-supply voltage
    1.7 to 3.6V
    Package
    CSP-8
    Product name
    MC3672 3-Axis Accelerometer
    Series name
    MC3600
    Width
    1.3mm
    Length
    1.1mm

    If you find an error in the product information, please let us know here.

      MC3672 3-Axis Accelerometer Overview

      The MC3672 is an ultra-low power, low noise, integrated digital output 3-axis accelerometer with a feature set optimized for wearables and the Internet of Moving Things (IoMT) devices in a 1.1×1.3mm WLCSP package. With its low power modes and tiny footprint this accelerometer extends sensor battery life and reduces the space required for the sensor by up to 3X. Low noise and low power are inherent in the monolithic fabrication approach, where the MEMS accelerometer is integrated in a single-chip with the electronics integrated circuit. The internal sample rate can be set from 14 to 1300 samples / second. Specific tap or sample acquisition conditions can trigger an interrupt to a remote MCU. Alternatively, the device supports the reading of sample and event status via polling.

      特長
      ・±2, 4, 8, 12, or 16g ranges
       8, 10, or 12-bit resolution with FIFO
      ・14-bit single samples
      ・Sample rate 13-1300 samples/sec
      Sample trigger via internal oscillator, clock pin, or software command
      ・Sniff and Wak modes
      0.4µA Sniff current @ 6Hz
      Separate or combined sniff/wake
      ・Ultra-Low Power with 32 sample FIFO
      0.9µA typical current @ 25Hz
      1.6µA typical current @ 50Hz
      2.8µA typical current @ 100Hz
      36µA typical current @ 1300Hz

      Simple System Integration
      ・I2C interface, up to 1MHz
      ・SPI Interface, up to 4MHz
      ・1.29 x 1.09 x 0.74mm 8-ball package
      ・Single-chip 3D silicon MEMS
      ・Low noise to 2.3mgRMS

      Downloadsː
    • MC3672 3-Axis Accelerometer Data Sheet

    • PCB Design Device Handling and Assembly Guidelines (AN-001)

    • MC3672 Arduino Driver

    • MC3672 Quick Start Guide and Demo


    • Evaluation Kits:
    • EV3672A Evaluation Board
    Design and Simulation Data
    Symbol/Footprint/3D Model Download from Ultra Librarian