Chip One Stop - Shopping Site for Electronic Components and Semiconductors

チップワンストップ

Menu
United States
Change
English
SELECT YOUR LANGUAGE
USD
SELECT YOUR CURRENCY FOR DISPLAY
About Preferential Rank / Discount

Current price of Item(s) have been applied below.
 


・Preferential Rank and Discount rate will be applied according to your usage of our web service.
・Discount is only applicable to orders from chip1stop web site.
・Discounts may not be applicable to all products and may be subject to MOQ.
・Please contact your representative for details of Preferential Rank.
・No other coupons may be used in conjunction with this discount.

THPM4301A  
THine Electronics   DC/DC Switching Regulators  -  Product Details

THPM4301A

  • C1S745600002051-1

Images are for reference only

  • Added to bookmarks.
    • ECCN:EAR99
    • HTSN:8542900000
    • Lifecycle Status:Active
    • RoHS2
    • PB free
    Switching style
    Step-down(Buck)
    Type
    Power Module
    Fan-out
    1
    Maximum input voltage
    6V
    Output voltage
    0.6 to 3.6V
    Input voltage
    2.95 to 6V
    Operating temperature range
    -40 to 85C
    Output voltage accuracy
    1%
    Package
    56pin LGA
    Output current
    0 to 6A
    Manufacturer Packaging
    Tape & Reel
    Manufacturer packaging quantity
    250

    If you find an error in the product information, please let us know here.

      "Our Intelligence Inductor Power Module offers significant benefits in high density Point of Load modules and represents the next step in POL integration.

      <Suitable for>
      ASIC, ASSP, FPGA, DSP, DDR

      <Features>
      1. High Efficiency - Inductor-based package allows very low DCR, reduced losses

      Compared to conventional packaging technologies, “this inductor technology” reduces constraints on the inductor size. This allows for larger gauge wire and coil diameters to be used within the inductor structure which results in lower power losses and a high efficiency module.

      2. High Power Density - Solutions require minimal board space
      The small size and very low profile (3 mm) package reduces board space, allowing higher density designs.

      3. Cooler Operating Temp. - Packaged in high thermal conductivity magnetic material
      The inductor body acts as a heat sink to evenly sistribute heat, produced by the IC and inductor, across the package and dissipate it to the ambient air. The measured surface temperature is reduced by up to 11.5℃ compared to a module with an internal inductor under identical conditions. High thermal conductivity avoids “hot spots”.

      4. Low Radiated EMI - Core material provides electro-Magnetic shielding
      The inductor material is conductive and acts as a shield over the internal components. All internal power traces are very short, minimizing the loop area and further reducing radiated EMI.

      We have the other line-ups upon Vout/Iout."