| 2023/12/01 |
|
PCN(Product Change Notice)
|
Notice of display change due to trade name change Target products Pressure sensor modules, pressure indicators, liquid leakage sensors Change timing Scheduled to change from production in December 2023 |
| 2023/12/01 |
|
PCN(Product Change Notice)
|
Title: Changes due to discontinuation of production of PG-100N/B electronic components
Discription of Changes: Due to the discontinuation of production of the electronic components used in PG-100N/B, we will change to substitute products.
Target model and its contents Target: PG-100N/B OP amplifier used for analog output section
Comparison of parts characteristics: Comparing the performance with the conventional product, it is the same or better, so there is no problem.
Schedule: After December 2023 |
| 2024/09/01 |
|
PCN(Product Change Notice)
|
Supplier Notice No.:8ZDGF-1653 Title: Notification of additional CE marking for batteries used in PG-100N/B, PG-200 and PG-208
Description: Addition of CE marking to the batteries used in these products. PG-100 series: ER6V, PG-100N/B series: LR03T PG-200 series and PG-208 series: ER6V
Reason for change: To comply with European (EU) battery regulations. (Effective from 18 August 2024).
Schedule: Scheduled for delivery in September 2024 or later. (*Subject to change depending on production status.) |
| 2025/10/01 |
|
PCN(Product Change Notice)
|
There was a mistake in the applicable model, so we would like to inform you again. Changes The die bond adhesive used to bond and fix the housing and sensor chip will be changed.
[Before change (current situation)] Silicon-based adhesive Epoxy-based adhesive [After change] Silicon-based adhesive (new)
*Currently, different adhesives are used for different pressure ranges, but after the change, they will be integrated into the same adhesive.
Change period: Planned to switch gradually from October 2025 production
Applicable models P-2000 and PA-400, PS30, PG-30, PG-100N, PG-200 (excluding absolute pressure type) series
*The PA-400, PS30, PG-30, PG-100N, and PG-200 series use the pressure sensor P-2000, so they are subject to the change.
[Changes] ① Absolute pressure type of PG-200 is not affected ② PA-400 is also affected |