Microchip | High-side current/power sensor from Microchip is world's first to feature both a configurable analog output and a 2-Wire digital bus
2015/08/14Microchip Technology
模拟
The PAC1921 is a dedicated power-monitoring device with a configurable analog output that can present power, current or voltage. All information is also provided on the 2-wire/I2C© compatible interface. The PAC1921 is designed for power measurement and diagnostic systems that cannot allow for latency when performing high-speed power management. The device is 0.4% accurate for current readings and 1% accurate for power readings.
Measurements are accumulated in large registers, allowing for integration periods of 500 μs to 2.9 seconds. The measurement is averaged and presented on the analog output with a full scale range of 3V, 2V, 1.5V, or 1.0V.
The PAC1921 has a READ/INT pin for host control of the measurement integration period. This pin can be used to synchronize readings of multiple buses between several devices. Data sampling and output attributes, such as the internal ADC resolution (11-bit or 14-bit) and sample rate, are configurable. The device can monitor power rails from 0-32V with a full-scale capability of 100 mV across the sense resistor. No input filters are required for this device.
Visit Chip1Stop Chinese site
Visit Chip1Stop Korean site
Visit Chip1Stop English site
Visit Chip1Stop German site
企业HP:
http://www.microchip.com/
Microchip Technology新闻发布
-
2015/12/16Microchip Technology
微控制器
-
2015/10/14Microchip Technology
微控制器
-
2015/09/16Microchip Technology
汽车
-
2015/07/24Microchip Technology
网络/通信
-
2015/05/19Microchip Technology
微控制器