| 2024/03/01 |
|
PCN(产品规格变更通知)
|
Bipolar transistor used in our pressure gauge PG-200, PG-208 series: 2SC6046 Notification of wafer size and manufacturing factory changes Schedule: Production from March 2024 onwards |
| 2024/09/01 |
|
PCN(产品规格变更通知)
|
Supplier Notice No.:8ZDGF-1653 Title: Notification of additional CE marking for batteries used in PG-100N/B, PG-200 and PG-208
Description: Addition of CE marking to the batteries used in these products. PG-100 series: ER6V, PG-100N/B series: LR03T PG-200 series and PG-208 series: ER6V
Reason for change: To comply with European (EU) battery regulations. (Effective from 18 August 2024).
Schedule: Scheduled for delivery in September 2024 or later. (*Subject to change depending on production status.) |
| 2025/01/01 |
|
PCN(产品规格变更通知)
|
We have been notified by the manufacturer that the Renesas transistors used in our pressure sensor circuits will be discontinued. We would like to inform you of the following changes. Change in the transistor components used in the current output section. Current product: 2SD1000 (Renesas) → Replacement: 2SC5810 (Toshiba)
Products affected by change PA-758, PA-838, PA-838D, PA-858, PA-928S, PAS838, PG-20, PG-25, PZ-30, PG75 *Only current output types of PG-20, PG-25, PZ-30, and PG75 are affected.
Schedule: Changes are planned to be made gradually from January 2026 onwards. |
| 2025/10/01 |
|
PCN(产品规格变更通知)
|
There was a mistake in the applicable model, so we would like to inform you again. Changes The die bond adhesive used to bond and fix the housing and sensor chip will be changed.
[Before change (current situation)] Silicon-based adhesive Epoxy-based adhesive [After change] Silicon-based adhesive (new)
*Currently, different adhesives are used for different pressure ranges, but after the change, they will be integrated into the same adhesive.
Change period: Planned to switch gradually from October 2025 production
Applicable models P-2000 and PA-400, PS30, PG-30, PG-100N, PG-200 (excluding absolute pressure type) series
*The PA-400, PS30, PG-30, PG-100N, and PG-200 series use the pressure sensor P-2000, so they are subject to the change.
[Changes] ① Absolute pressure type of PG-200 is not affected ② PA-400 is also affected |